D-1
MAINTENANCE
ELECTRIC SHOCK CAN KILL.
•
Turn the input power OFF at the
welding power source before
installation or changing drive rolls
and/or guides.
•
Do not touch electrically live parts.
•
When inching with the gun trigger, electrode and drive
mechanism are "hot" to work and ground and could
remain energized several seconds after the gun trigger
is released.
•
Do not operate with covers, panels or guards removed
or open.
•
Only qualified personnel should perform
maintenance work.
roUtine Maintenance
•
Check weld cables and gas hoses for cuts.
•
Clean and tighten all weld terminals.
perioDic Maintenance
•
Clean the drive rolls and inner wire guide and replace if worn.
•
Blow out or vacuum the inside of the feeder.
WARNING
ACTIV8X™
MAINTENANCE
