IS744 ECN 4665
Page 10 of 10
CLEANING
Your Lincat product has a manufacturer’s warranty. This requires you to maintain and care
for your product and follow maintenance instructions. If you fail to maintain your unit or
damage components Lincat may charge you for warranty repair. Please check the website
for terms and conditions.
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent do not use abrasive materials.
Rinse and dry thoroughly with a soft cloth.
Hob and Oven Components
Cleaning pan supports and burner caps
Pan supports can easily lifted free of the
hob and cleaned manually or in a
suitable dishwasher.
Burner caps should be routinely cleaned
and the ports inspected. The burner cap
ports should be dry and free from debris.
Replace the cleaned burner cap by
aligning the two lugs with the burner
body pockets. The blanked areas of the
burner cap should align with the pan
support fins.
Oven shelves will slide freely to the pre-
set stop positions.
To remove or reposition the shelves
ensure the shelf is pushed home to the
rear of the oven.
Tilt the shelf at the rear to clear the rack
runner and slide forward. Once clear lift
the shelf so as to clear the stop pin from
the rack runner.
With shelves removed the side racks can
be removed for cleaning. Degreaser may
be used for stubborn areas.
Maintain the oven cavity in a clean state.
Fig 2
Fig 3
