IS744 ECN 4665
Page 15 of 15
Remove the element retaining screws L
and withdraw the element M from the
cavity
Fit the replacement element and secure
fully.
Refit the fan guard and reconnect the
wires to the element terminals
Replace the rear access panels
Reinstall the oven shelves
Reinstate power and perform PAT test
Replacing the Fans and Motors
Remove the fan guard as in Fig 11
Support the fan N and prevent from
rotation
Loosen the nut O, left hand thread and
remove the nut from the spindle
Remove the fan
Remove both the rear access panels as in
Fig 10
Disconnect the wires from the motor
terminals
Remove the 3 retaining screws Q
Withdraw the fan assembly P
L
M
O
N
Fig 13
Q
P
Fig 14
Fig 12