IS 681 ECN 4301
Page 3 of 20
WARNINGS AND PRECAUTIONS
This appliance must be installed, commissioned, serviced and converted by a qualified
person in accordance with national and local regulations in force in the country of
installation.
Only qualified or trained personnel should use this appliance.
Parts protected by the manufacturer shall not be adjusted by the user.
Strip plastic coating and clean the appliance before use.
Do not leave the appliance unattended whilst operating.
Do not operate with dust cover in place.
Do not operate without oil in the tank.
Do not over heat the oil.
Do not obstruct or block the flue.
Care must be taken when replenishing the oil during service.
If this appliance is fitted with castors, use caution at all times when manipulating or moving,
and lock castors when appliance is in position.
Oil should be filtered regularly. Old oil has a reduced flashpoint and is more prone to surge
boiling.
During operation parts may become hot - avoid accidental contact.
Install a suitable fire extinguisher and fire blanket within reach of the appliance.
Disconnect from services before cleaning or servicing/maintenance.
Do not use flammable solvents and cleaning aids.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Care must be taken to follow the instructions on page 15 when using semi and solid oils and
fats and to use the melt cycle until the media is in a liquid form.
Oil or fat must be liquid prior to operating the pump.
