Lincat OE8802 Installation, Operating, Servicing And Conversion Instructions Download Page 9 | Manualshive

Page: 9 / 14

Lincat OE8802 Installation, Operating, Servicing And Conversion Instructions Download Page 9

IS 583 ECN 3851

Page 9 of 14

Energy regulator

Remove hand wheel.
Remove control knob and facia panel.
Unscrew the fixing screws and disconnect the wiring.
Remove.
Replace.

Limiting thermostat

Remove hand wheel.
Remove front lower facia panel.
Unscrew the fixing screws and disconnect the wiring.
Remove the thermostat from the bracket.
Remove thermostat bulb long cover plate.
Remove the thermostat bulb from the bracket.

Safety thermostat

Remove hand wheel.
Remove facia panel.
Unscrew the fixing screws and disconnect the wiring.
Remove thermostat bulb long cover plate.
Remove the thermostat bulb from the bracket.
Replace all removed parts in reverse order

Amber neon

Remove hand wheel.
Remove facia panel.
Unscrew the neon and disconnect the wiring.
Replace all removed parts in reverse order

Water valve replacement

Remove left hand access cover.
Disconnect water valve
Unscrew and remove from pipe and brackets
Replace all removed parts in reverse order

Tank position micro switch

Remove right hand access cover.
Disconnect micro switch
Remove from bracket
Re-adjust to ensure that the micro switch cuts out when the tank starts to lift of its
rest position
Replace all removed parts in reverse order

Contactor

Remove lower facia panel.
Unclip contactor.
Disconnect wiring.
Rewire replacement contactor
Reclip contactor.
Replace flame controller.
Replace all removed parts in reverse order

«
...
7
8
9
10
11
...
»

Summary of Contents for OE8802















Reviews:

No comments