IS 583 ECN 3851
Page 7 of 14
Button (b) for filling the tank with water.
The green neon (c) indicates that the power is on.
The amber neon (d) indicates that the heating element is on.
The hand wheel (e) raises (clockwise) and lowers (anticlockwise) the tank.
The water connection is shown at (f)
The Safety thermostat can be reset by pressing the button (g) after the appliance has
cooled down
The gas valve control knob displays the following: Off
1 to 5 where 1 approximates to 90
°
C and 5 approximates to 280
°
C
Caution:
Ensure that the container into which the food product is emptied is suitable
to contain food at a high temperature.
Caution:
The lid must be lifted fully up before operating the tank tilting mechanism.
The tank may be raised or lowered at any time during the cooking cycle. To do this,
lift the lid and turn the hand wheel clockwise on the appliance to raise and empty the
tank. Turn the wheel counter-clockwise to lower the tank.
Moderate the speed to obtain an even and controlled pour, this will vary depending
on viscosity of contents
Filling the tank with water
Caution: Ensure the tank is seated correctly in the lowered position before
adding water.
Press the water load button to add water.
Switching on the bratt pan
Set the control knob to the desired setting.
Switching off the bratt pan
Turn the thermostat knob to the ‘Off’ position
Turn the appliance off at the electrical supply.
Emptying the tank
Prepare a suitable vessel beneath the discharge spout of the tank.
Lift the lid.
Slowly raise the tank by turning the wheel clockwise.. Take care not to create ‘surge’
of liquid contents by attempting to raise the tank too quickly.