Lincar Annarita 698 TP-SAC, Using Instructions And Maintenance

Page: 68 / 116

IT IT IT IT----GB GB GB GB----FR FR FR FR mod. 698 TPC– 698 TP-SAC
68/116
Menu 09 PELLET CORRECT - (Correction of appliance combustion).
Radiocontrol Display Description Example
PELLET CORRECT Combustion modification
ACCESS KEY Insert access key to accede to the combustion modification 33
PELLET CORRCT Correction of the load of fuel -02
Menu 10 SETTINGS TECHNIC -(Reserved to TECHNICIANS).
Radiocontrol Display Description Example
TECHNICAL SETTINGS Menu reserved to TECHNICIANS
ACCESS KEY Insert access code
This section is reserved to the TECHNICIANS and permits to effect working regulations on the
appliance.
Cleaning to be carried out by the User
For thew correct working of the appliance, it is necessary to carry out some short maintenance
operations, these operations should be effected always with switched off appliance and in cold
conditions
Every DAY
Fume duct cleaning.
To be effected with appliance
switched off and in strictly cold
conditions.
Take the lever placed into the
lower compartment inside the
front door; insert the lever in the
central visible pin ( see the
picture); act by pulling down and
releasing 4 / 5 times (see picture).
In this way you clean the fume
ducts.
Burner basket cleaning. Take out the burner basket, remove the residual dregs, re-place the
basket taking care to verify the perfect join in its housing.
Ashtray cleaning Open the lower door, take out the ashtray cover (to release the cover, turn
the two lateral hooks), take the ashtray and empty it carefully, paying attention to possible hot
combustion residuals, place the ashtray in its housing and closed the cover of the ashtray.
DO NOT empty the ashes in inflammable containers, remember that into the ashes could be
some embers, even after several hours from the extinction.