Lincar Annarita 698 TP-SAC, Using Instructions And Maintenance

Page: 43 / 116

IT IT IT IT----GB GB GB GB----FR FR FR FR mod. 698 TPC– 698 TP-SAC
43/116
Preliminary operations
•
Take away the packing
•
Before installation, check the appliance integrity. In case of doubt, do not use the
appliance and call the dealer.
•
Packing materials is for recycle, getting it in the specify container
Appliance positioning
•
The installation room should have :
−
A suitable floor for stove weight. Should the existing construction not satisfy this
requirement, necessary measurements must be taken (I.e. a plate for the distribution
of the weight)
−
A suitable floor for stove calorific radiation, which grants against fire risks.
−
The installation of the appliance should grant an easy access for the cleaning
operations of the appliance itself, as well as of gas exhaust ducts and of the
chimney.
−
A minimal distance from flammable materials (see security distances)
−
The room must be continuously ventilated according to the local rules.
FLOOR PROTECTION
The equipment must be installed on a non–combustible surface. In case of flammable floor (as
wood, moquette, etc.) is necessary to prepare a protective base of the floor (sheet steel,
ceramic or other) with the following dimensions:
−
Hold up in front
≥
500 mm;
−
Hold up lateral
≥
300 mm;
−
Hold up back
≥
100 mm
SECURITY DISTANCES
•
From NOT combustible object :
−
A > 600 mm B > 150 mm C > 50 mm D>1000 mm
•
From combustible object and from principal wall in
reinforced concrete :
−
A>600 mm B>300 mm C>50 mm D>1000 mm
•
The minimal distance between the stove and every
objects over it must be at least 1 mt