Lincar Annarita 698 TP-SAC, Using Instructions And Maintenance

Page: 67 / 116

IT IT IT IT----GB GB GB GB----FR FR FR FR mod. 698 TPC– 698 TP-SAC
67/116
M-2-4-04 START 2 WEEK-END Insert 2 starting hour 14:00
M-2-4-05
STOP 2 WEEK-END Insert 2 extinction hour off
The program hours will be repeated every day of the week in the same way. For a correct
execution of the programs, set very carefully the data of Menu 01.
Selecting oFF instead of the starting or extinction hour, the stove exclude the automatic starting or
extinction
Menu 03 SELECT LANGUAGE - (setting up the language of the radiocontrol).
Radiocontrol Display Description Example
SELECT
LANGUAGE
Set up the language of the radiocontrol
ITALIAN
Available languages : ITALIAN, ENGLISH, DEUTSCH, FRANCAIS
Menu 04 SELECT FEELER (selecting room feeler).
Radiocontrol Display Description Example
Select feeler Select which room temperature feeler you want to utilize REMCONTR
Available selections : REMOTECONTROL, INTERNAL
REMOTECONTROL, The temperature will be taken from the radiocontrol.
INTERNAL, The temperature will be taken from the feeler put on the back of the appliance.
Menu 05 STATUS STAND-BY - (Set up way of appliance extinction according to the room
and boiler temperatures).
Radiocontrol Display Description Example
STATUS STAND-BY
Activate(on) / Disactivate(off) the stop modality if the set room
or boiler temperatures have been exceeded .
oFF
Available selections : on, oFF
ON, If the appliance is exceeding 2°C the set value of room or boiler temperature, it starts the
extinction cycle.
OFF, If the appliance is exceeding the set value of room or boiler temperature, it will continue to work
at min. power, without extinctinguishing.
Menu 06 STATUS BUZZER - (Setting up of buzzer sound).
Radiocontrol Display Description Example
STATUS BUZZER Select the buzzer modality you wish ONLY ALARM
Available selections: OFF, ONLY ALARMS, ALWAYS ON
OFF – Always off ONLY ALARMS – Sounds only if an alarm has occurred.
ON ALWAYS, sound in case of alarm and at any tuch of the buttons of the radiocontrol.
Menu 07 LOAD INITIAL - (Continuos fuel load setting).
Radiocontrol Display Description Example
LOAD INITIAL Activates the continuos load of fuel
this operation can only be effected when the appliance on the display is evidencing “OFF”. This menu is
utilized to fill the screw feeder when the appliance is new or in case of emptying of the pellet container.
Menu 08 STATUS STOVE - (Displays the status of the appliance).
Radiocontrol Display Description Example
STATUS STOVE Shows informations about the working of the appliance
Displayed values:
Fume temperature, fume expeller motor rev/min, appliance status, room temperature, boiler pressure,
time of fuel loading, and a screening of informations for TECHNICIANS.