mod. 135GN-145GN GB
5/20
Fig. 3
Fig. 1
Fig. 2
1.4
Connection
•
Before connection check technical data reported in the technical plate ( Chap. 4 ) and
control that it correspond to the ones required in the order.
•
All heating biomass equipment especially wood appliance has to evacuate the combustion
products in a flue built in conformity with normative in force.
•
The following instructions describes „ informations for a good installation „ and it refers
to a normative in force but it are not to be consider exhaustive for installations laws.
COLLAR EXHAUST FUMES ASSEMB LY Fig.1
Place the collar over the plate into special place.
HANDRAIL ASSEMB LING Fig.2
To insert the caps “ D” on terminals
support “ C”.
To insert the support “ C” in tube “ A”
than fix it to the plate frame with
screws “ F” interposing the connection
ring “ B”.
TOP ASSEMBLING
Fig.3
•
To take the top out of wood drawer
•
To put the top over wood cooker plate, insert
the top pin into the right holes on plate fra me
than screw it and tighten.
Exhaust fumes collar