Linak CBH Advanced, User Manual

Page: 9 / 33

Page 9 of 32
Repairs
In order to avoid the risk of malfunction, all HOMELINE
®
repairs must only be carried out by authorised LINAK
®
workshops or
repairers, as special tools must be used and special gaskets must be fitted. Lifting units under warranty must also be returned
to authorised LINAK workshops.
Warning!
If any of the HOMELINE
®
products are opened, there will be a risk of subsequent malfunction.
Warning!
The HOMELINE
®
systems are not resistant to cutting oil.
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
Herewith declares that LINAK HOMELINE® products as characterized by the following models and
types:
Control Boxes CB7, CB9H, CBH Advanced, CBH Basic
And
Linear Actuators LA27, LA27CS, LA28, LA29, LA31 HOMELINE
Dual Actuators TD1, TD3
And
Controls HB10, HB10RF, HB20, HB20RF, HB40, HB60, HC10, HC10RF, HC20RF,
And
Accessories DC CONNECTOR, DJBH, LED Lightbox, Lightplug001
,
Massage Motor,
SMPS001, SMPS002, SMPS006, TR6, USB Connector
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I,
Essential health and
safety requirements relating to the design and construction of machinery
:
1.5.1 Electricity supply
The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg, 2014-10-09
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
Original Declaration