background image

Page 33 of 32

Copyright

  ©

  LINAK 2018.01    MA-M9-02-529-G 

 

LINAK 

A/S reserve the right to mak

e technical alter

ations

Terms of use

The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and 
up-to-date information on its products. 
However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes 
without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. 
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability of any 
particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed in its catalogues or 
other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.

FACTORIES

China

LINAK (Shenzhen) Actuator Systems, Ltd.
Phone:   +86 755 8610 6656
Phone:   +86 755 8610 6990
E-mail:   [email protected]
www.linak.cn 

Denmark - Headquarters

LINAK A/S - Group Headquarters

Phone:   +45 73 15 15 15
Fax:  

+45 74 45 80 48

Fax (Sales): +45 73 15 16 13
E-mail:   [email protected]
www.linak.com 

USA

LINAK U.S. Inc.

North and South American Headquarters
User support: +1 800 392 7638
Phone:   +1 502 253 5595
Fax:  

+1 502 253 5596 

E-mail:   [email protected]
www.linak-us.com 

SUBSIDIARIES

Australia

LINAK Australia Pty. Ltd
Phone:   +61 3 8796 9777
Fax:  

+61 3 8796 9778

E-mail:   [email protected]
www.linak.com.au 

Austria

LINAK Repräsentanz - Österreich (Wien)
Phone:   +43 (1) 890 7446
Fax:  

+43 (1) 890 744615 

E-mail:   [email protected]
www.linak.at 

Belgium

LINAK Actuator-Systems NV/SA
(Belgium & Luxembourg)
Phone:   +32 (0)9 230 01 09
Fax:  

+32 (0)9 230 88 80 

E-mail:   [email protected]
www.linak.be 

Brazil

LINAK DO BRASIL COMÉRCIO DE 
ATUADORES LTDA.
Phone:   +55 (11) 2832 – 7070
Fax:  

+55 (11) 2832 – 7060 

E-mail:   [email protected]
www.linak.com.br 

C

anada

LINAK Canada Inc.
Phone:   +1 502 253 5595
Fax:  

+1 416-255-7720 

E-mail:   [email protected]
www.linak-us.com 

Czech Republic

LINAK C&S S.R.O.
Phone:   +420581741814
Fax:  

+420581702452 

E-mail:   [email protected]
www.linak.cz 

Denmark - International

LINAK International
Phone:   +45 73 15 15 15
E-mail:   [email protected]
www.linak.com 

Denmark - Sales

LINAK DANMARK A/S
Phone:   +45 86 80 36 11
Fax:  

+45 86 82 90 51 

E-mail:   [email protected]
www.linak.dk 

Finland

LINAK OY
Phone:   +358 10 841 8700
E-mail:   [email protected]
www.linak.fi 

France

LINAK FRANCE E.U.R.L
Phone:   +33 (0) 2 41 36 34 34
Fax:  

+33 (0) 2 41 36 35 00 

E-mail:   [email protected]
www.linak.fr 

Germany

LINAK GmbH
Phone:   +49 6043 9655 0
Fax:  

+49 6043 9655 60 

E-mail:   [email protected]
www.linak.de 

India

LINAK A/S India Liaison Office
Phone:   +91 120 4531797
Fax:  

+91 120 4786428 

E-mail:   [email protected]
www.linak.in 

Ireland

LINAK UK Limited (Ireland)
Phone:   +44 (0)121 544 2211
Fax:  

+44 (0)121 544 2552

         +44 (0)796 855 1606 (UK Mobile) 
         +35 387 634 6554 
                   (Republic Of Ireland Mobile) 
E-mail:   [email protected]
www.linak.co.uk 

Italy

LINAK ITALIA S.r.l.
Phone:   +39 02 48 46 33 66
Fax:  

+39 02 48 46 82 52 

E-mail:   [email protected]
www.linak.it 

Japan

LINAK K.K.
Phone:   81-45-533-0802
Fax:  

81-45-533-0803

E-mail:   [email protected]
www.linak.jp 

Malaysia

LINAK Actuators Sdn. Bhd.
Phone:   +60 4 210 6500
Fax:  

+60 4 226 8901 

E-mail:   [email protected]
www.linak.my   

Netherlands

LINAK Actuator-Systems B.V.
Phone:   +31 76 5 42 44 40
Fax:  

+31 76 5 42 61 10 

E-mail:   [email protected]
www.linak.nl 

New Zealand

LINAK New Zealand Ltd
Phone:   +64 9580 2071
Fax:  

+64 9580 2072 

E-mail:   [email protected]
www.linak.com.au 

DISTRIBUTORS

Argentina

NOVOTEC ARGENTINA SRL
Phone:   011-4303-8989/8900
Fax:  

011-4032-0184 

E-mail:   [email protected]
www.novotecargentina.com 

Colombia

MEM Ltda
Phone:   +[57] (1) 334-7666
Fax:  

+[57] (1) 282-1684

E-mail:   [email protected]
www.mem.net.co 

India

Mechatronics Control Equipments India Pvt Ltd
Phone:   +91-44-28558484, 85
E-mail:   [email protected]
www.mechatronicscontrol.com 

Indonesia

PT. HIMALAYA EVEREST JAYA
Phone:   +6 221 544 8956, +6 221 544 8965
Fax:  

+6 221 619 4658, +6 221 619 1925

E-mail:   [email protected]
www.hej.co.id 

Israel

NetivTech LTD
Phone:   +972 55-2266-535
Fax: 

+972 2-9900-560

Email:   [email protected] 
www.netivtech.com

Russian Federation 

OOO FAM
Phone:   +7 812 3319333
Fax:  

+7 812 3271454 

E-mail:   [email protected]
www.fam-drive.ru 

Singapore

Servo Dynamics Pte Ltd
Phone:   +65 6844 0288
Fax:  

+65 6844 0070

E-mail:   [email protected] 
www.servo.com.sg

South Africa

Industrial Specialised Applications CC
Phone:   +27 011 466 0346
E-mail:   [email protected]
www.isaza.co.za 

United Arab Emirates

Mechatronics 
Phone:   +971 4 267 4311 
Fax:  

+971 4 267 4312

E-mail:   [email protected]

Norway

LINAK Norge AS
Phone:   +47 32 82 90 90
Fax:  

+47 32 82 90 98

E-mail:   [email protected]
www.linak.no 

Poland

LINAK Polska
LINAK Danmark A/S (Spólka Akcyjna)
Phone:  +48 22 295 09 70
Phone:   +48 22 295 09 71 
E-mail:   [email protected]
www.linak.pl 

Republic of Korea

LINAK Korea Ltd.
Phone: +82-(0)2-6231-1515
Fax:  

+82-(0)2-6231-1516

E-mail:   [email protected]
www.linak.kr 

Russian Federation

OOO LINAK
Phone:   +7 495 280 14 26
Fax:  

+7 495 687 14 26 

E-mail:   [email protected]
www.linak.ru 

Spain

LINAK Actuadores, S.L.u
Phone:   +34 93 588 27 77
Phone:   +34 673 84 40 06
Fax:  

+34 93 588 27 85 

E-mail:   [email protected]
www.linak.es 

Sweden

LINAK Scandinavia AB
Phone:   +46 8 732 20 00
Fax:  

+46 8 732 20 50

E-mail:   [email protected]
www.linak.se 

Switzerland

LINAK AG
Phone:   +41 43 388 31 88
Fax:  

+41 43 388 31 87

E-mail:   [email protected]
www.de.linak.ch  

Taiwan

LINAK (Shenzhen) Actuator systems Ltd. 
Taiwan Representative office
Phone:   +886 2 27290068
Fax:  

+886 2 27290096

Mobile:   +886 989292100 
E-mail:   [email protected]
www.linak.tw 

Turkey

LINAK İth. İhr. San. ve Tic. A.Ş.
Phone:   + 90 312 4726338
Fax:  

+ 90 312 4726635 

E-mail:   [email protected]
www.linak.com.tr 

United Kingdom

LINAK UK Limited
Phone:   +44 (0)121 544 2211
Fax:  

+44 (0)121 544 2552 

E-mail:   [email protected]
www.linak.co.uk 

Summary of Contents for CBH Advanced


































Reviews: