4
5
Ending
an
emergency call
For safety reasons, the emergency
call cannot be cancelled after the
80 second period. Our telecare
team will close the call once we
have answered and made sure
you are ok.
Initiating
a test
emergency call
When you first receive your
Limmex Watch and have fully
charged the battery, please make a
test call to our team. It is important
you do this so we can be sure it is
working correctly.
Triggering
an
emergency call
• The Limmex Watch is designed
to trigger emergency calls
outside of the home
• Press the button on the right
hand side for 1 second until you
hear a beeping sound
• Once pressed it will beep for
approximately 80 seconds to let
you know it has been activated
• A voice will confirm that your
call has been received and that
you will be connected shortly
• It will then connect you to
one of our highly trained
operators who will discuss the
necessary steps with you and
organise help. It normally takes
about 140 seconds to make a
connection with our telecare
team. Once connected to our
team, the watch will continue to
acquire your location via GPS.
Charging the battery
Charging
socket closed
Charging
socket open
The Limmex Watch has a
re-chargeable GPS battery and
a separate, non-chargeable
battery for time keeping. Under
normal operation (not making an
emergency call), the GPS battery
will retain its charge for
several months.
A red light will blink on the dial
face when it needs to be recharged.
If you do not recharge within
24 hours, a text alert will be sent to
the mobile number/email address
you have provided. It is important
you re-charge the battery as soon
as you receive an alert.
The light will go out again (after
approx 1–2 hours) once the battery
is fully charged.
IMPORTANT NOTICE:
Due to
the complex nature of the
technology in such a small
design it means the GPS locator
significantly drains the battery
life of the product. You must
charge the watch after activating
an emergency call.
Plugging in the charger
• Turn the metal base of the watch
to plug in the charger.
• The red light on the watch
face will remain lit during the
charging procedure
• The light will go out again once
the battery is fully charged
(approx 1–2 hours)
Water resistance
The Limmex Watch is resistant to
splash water. Please make sure it
is not fully submerged in water or
kept in humid areas for a long time.
Should the watch be exposed to
humidity or water, the alarm button
and the time winder need to stay
in default position to prevent water
flowing into the watch case.
ON02264 Limmex User Manual FP.indd 4-5
16/10/2014 14:02
