21
© Limitless Innovations, Inc.
Operation Instructions
cont’d
USING THE POWER BANK
1. Remove the Cap from the Back Panel of the JumpSmart
2. Plug a USB cable into one of the
USB Charging Ports (Output).
3. The Battery Capacity Indicator
Lights will illuminate if properly
connected and ready to use.
4. Plug the opposite end of the USB cable
into a mobile device. The device will begin to charge.
5. Repeat steps 2 and 4 to charge a second mobile device.
NOTE:
If the Flashlight and the Power Bank are being
used simultaneously, the device may charge at a slower rate.
NOTE:
When using both USB Ports (Output), the power will be
shared
between both ports.
USING THE S.O.S. AUDIBLE ALARM
1. Remove the Cap from the Back
Panel of the JumpSmart
2. Press the S.O.S. Power Button located
on the Back Panel of the JumpSmart to
activate the Alarm.
3. Press the S.O.S. Power Button again to
deactivate the Alarm.