19
© Limitless Innovations, Inc.
Operation Instructions
cont’d
NOTE:
If the red “Error” Safety Indicator
Light illuminates after connecting the
Smart Jumper Cables to the battery
terminals, check the connection.
If the battery terminal is heavily corroded
it may cause a bad connection. Refer to the
vehicle’s owner manual on how to clean.
If the “Error” message continues, one of the
10 Safety Checks listed on page 15 were found.
See a certified mechanic.
6. Once the vehicle has been successfully started, proceed to remove the
Jumper Cables in the reverse order that they were attached, beginning
with the Black Jumper Cable.
NOTE:
If the vehicle does not start after the first attempt, disconnect
the Smart Cables from the JumpSmart and wait at least 60 seconds before
repeating steps 1-4.
Do not attempt to jump start a vehicle more than three times. If the vehicle
battery does not start after the third try, consult a certified mechanic.
