17
© Limitless Innovations, Inc.
Operation Instructions
cont’d
CHARGING THE JUMPSMART
1. Remove the Cap from the Back of the JumpSmart.
2. Plug the Micro USB Cable into the Micro Charging Port (Input)
on the Back Panel.
a. If using the USB Wall Charger:
3a. Plug the USB Wall Charger into a
standard 110V AC wall outlet.
4a. Plug the opposite end of the Micro
USB Cable into the USB Port of
the Wall Charger.
b. If using the USB Car Charger:
3b. Plug the USB Car Charger
into a standard 12V Vehicle
Power Socket.
4b. Plug the opposite end of the
Micro USB Cable into the USB Port
of the Car Charger.
NOTE:
While charging, the Battery Capacity Indicator Lights will blink
to indicate the percentage of charge. When all 4 Indicator Lights have
stopped blinking, the JumpSmart is completely charged. It will take
approximately 3-4 hours to fully charge the JumpSmart from a
completely drained battery. Additionally, while charging the JumpSmart,
the USB Ports (Output) will not function.