18
© Limitless Innovations, Inc.
Operation Instructions
cont’d
USING THE JUMP STARTER
1. Plug the Smart Cable Jumper Box into the
Jump Starter Port located on the Back
Panel of the JumpSmart.
2. Once plugged in, the green and red Safety
Indicator Lights will flash in an alternating
pattern on the Smart Cable Jumper Box.
The Smart Cables can now be
connected to the battery terminals.
TIP:
Use the Smart Cable Mini Flashlight
located on the end of the Smart Cable Jumper Box
to shine light on the battery terminals.
3. Connect the
RED
clamp of the Smart Cables
to the
POSITIVE (+)
terminal of the vehicle battery.
4. Connect the
BLACK
clamp of the Smart Cables to
the
NEGATIVE (-)
terminal of the vehicle’s battery.
5. Once both the positive and negative clamps are
properly connected, the “Start” (green) Safety
Indicator Light on the Smart Cable Jumper Box will
remain illuminated. The vehicle is now ready to be started.