11
INSTALLING AURORA SE
Aurora SE can be installed in a variety of configurations depending on the number
and arrangement of LED pixels. It is highly recommended to test your Aurora
system in an accessible area before performing the final installation.
Install Aurora SE with a Single NDB
Required Components
• Aurora SE
• Mobile Device
• Leader Cables (Optional)
• LED Pixels Strands
• Ethernet Cable
• NDB
• 12V or 24V Power Supply
Method
1. Connect the NDB to an NDB power supply.
2. Connect the NDB to Aurora SE using an Ethernet Cable
3. Connect leader cables to each NDB port (optional).
4. Connect LED pixel strands to each leader cable (or to each NDB port if leader
cables are not used).
5. In the Aurora Mobile App, navigate to
device settings
>
protocols
>
NDB
and
refresh the NDB list to gain access to your NDBs configuration settings.
6. Configure the NDB, Audio Settings, and customize your light show using the
Aurora Mobile App. Refer to the Aurora Mobile App Manual for more details.
