Lilin PSR5024EX20, Instruction Manual

Page: 8 / 11

[ FIG.9] [ FIG.10]
To prevent the camera from falling, you should first secure the safety strap to the camera body (FIG.12).
Next, connect the RJ-45 cable and AC24V power connector to the hub on the body (FIG.13 & FIG.14).
Step 5 Connect the control wires
[ FIG.11]
[ FIG.16] [ FIG.17]
Allign markings on the quick release adaptor and the camera body. Twist the camera body clockwise
into the adaptor (FIG.15). Tighten the three bolts on the adaptor (FIG.16) to secure the camera and finish
the installation (FIG.17).
Step 6 Install the camera body
Low Temperature Power-Up
Camera may perform abnormally at low temperature. Hence, follow the below procedure
when the camera is off due to power outage or other issues and needs to be restarted under
-40°C to -5°C.
Low temperature power-up procedure
Power up and wait for the heater to warm up for 15 minutes before you operate the camera.
G
N
D
N
C
2
C
O
M
2
N
O
2
N
C
1
C
O
M
1
N
O
1
G
N
D
IN
4
IN
3
IN
2
IN
1
O
U
T
G
N
D
IN
[ FIG.14] [ FIG.13] [ FIG.12]
[ FIG.15]
Note
:
After completing the installation of the dome camera, lock the
safety screw on the camera bracket to avoid falling (FIG.18).
[ FIG.18]