Please read the manual before attempting installation or operation
1. Do not use any chemical detergent to clean the machine surface; use a damp cotton cloth
only. Regularly clean the dome cover to ensure focusing accuracy.
2. Install the Fast Dome in a dry area. Water and high humidity may damage
internal parts. External housing should be used for outdoor installation.
3. Use parts supplied by the manufacturer only; use of unqualified part will void the warranty.
4. Avoid installing the equipment on an unstable surface. Make sure the installation location is
solid and stable. Falling equipment may injure personnel and damage the equipment.
5. Do not install the equipment near any flammable gas. Violation may cause fire or injury.
6. Avoid running video and signal cables through or passing interference sources such
as electromagnetic wave, broadcast station, power generator, elevator motor, or high
voltage are, etc. Interference may cause the equipment not to function properly.
7. Make sure the power cable is properly connected. Loosened power cables may cause
serious short circuit or fire.
8. Make sure all cables are properly connected. Do not place any object on the cables.
Replace the cable if damaged. Violation may cause short circuit, fire, and injury.
9. Make sure all wires and cables are properly grounded to avoid damage caused by lightning.
10. Do not put any foreign objects inside the equipment and do not spray any liquid on the
equipment to avoid short circuit and subsequent damage.
11. Do not touch power connection with wet hands to avoid short circuit or electric shock.
12. Do not apply external force on the equipment. Violation may cause damage.
13. Do not expose the equipment directly to sunlight. Violation may cause color fading or damage.
14. Do not install the equipment in high or low temperature environment to
avoid damage. The operating temperature is between -40°C - +50°C.
15. The Fast Dome consists of highly sensitive electronic parts inside. Do not try to repair the
equipment. Only a qualified technician may disassemble and repair the equipment. Shut off
the power before disassembling the equipment and do not power it on unless the casing is
completely closed.
16. Turn off the power immediately and contact the technician when the following occurs:
A. Damage on power cable or plug.
B. Water leak into the equipment.
C. Fast Dome does not function normally.
D. Equipment falling on the ground or damage on external casing.
WARNINGS & CAUTIONS
