One shoot
Press the 2 button to set as single transmission mode. Only when press button, then transmits
the protocol.
10. INFORMATION
Product mode, Joystick type and System version information
display.
11. BAUD RATE
Transmission speed setting.
Press the 1 button to set the baud rate: 9600bps
Press the 2 button to set the baud rate: 4800bps
Press the 3 button to set the baud rate: 2400bps
Push the joystick down to select the next page
Press the 4 button to set the baud rate: 19200 bps
SYSTEM INFORMATION
Product :
Joystick 3 axis
Version : 1.3.0
BAUD RATE SETUP
1. 9600
2. 4800
3. 2400
FAST DOME OPERATIONS
Switch to PTZ Control Mode
Press SHIFT + CAM button to set the keyboard
controller to the PTZ operation mode.
Function keys
F1
To set the speed that Fast Dome Camera travels between preset positions.
F2
To set the dwell time of preset position.
F3
To store the preset data and the save data will be show in the LCD.
F4
To set the preset groups.
SHIFT + F1
180 Horizontal Instant Flip. (Same as
key)
SHIFT + F2
Manual speed switch of Zoom, Focus and Iris. (Same as
key)
SHIFT + F3
IR Cut Filter Swap. (Same as
key)
Menu Setup Using Joystick
Press the SET button to activate the Fast Dome Camera setup menu.
ESC
Move cursor up
1. Decrease a digit
2. Move cursor left
Enter a submenu
Move cursor down
1. Increase a digit
2. Move cursor right
ESC/Exit a setup menu
Call Camera
Enter a number from 1~256 using the number pad and press
the CAM button to select the camera.
Example
Call camera #12.
Note
The number entered will be show on LCD panel in the format of PTZ mode
ID=XXX.
CAM
SHIFT
2009/01/01 12
00
00
PTZ MODE ID=000
CTRL2
180
SPRAY
ICR
WIPER
LENS
1
2
CAM
2009/01/01 12
00
00
PTZ MODE ID=xxx
MLP2 9600
9
BAUD RATE SETUP
4. 19200