Page 10 of 12
IP Fast Dome Quick Installation Guide
To access the Home Page of the selected unit, run the View/Open Web on the menu bar. If
your browser is opened and automatically connected to the IP Fast Dome Home Page, it
menas you have assigned an IP Address to the unit successfully. Now you can close the IP
Installer and start to use your IP Fast Dome.
*
Verify the IP Address and Open the Home Page
Chapter 4-2. Assign IP Address by ARP
Before using IP Fast Dome, users must set the IP address in advance. There are two different
ways to set IP address into IP Fast Dome.
Note before IP assignment
Make sure the IP Fast Dome is powered on and connected to the network correctly.
Obtain a unique IP address from your network administrator.
Each IP Fast Dome has a unique Ethernet address (MAC address), which is recorded
as 12 digits serial number labeled at the bottom side of IP Fast Dome / Video Server /
Network Camera, e.g. 000429XXXXXX.
The following example uses the PC with the IP address 192.168.0.1 and is going to setup
IP Fast Dome with the IP address 192.168.0.200 whose MAC address is 000429000150.
those addresses featured as examples in this document, always consult
your network administrator before assigning an IP address.
The IP address assigned to the IP Fast Dome shall be the same IP domain (presented as
same subnet mask) as the PC IP address. In our case, a PC IP address is 192.168.0.1
and the IP Fast Dome is 192.168.0.200, so the subnet mask shall be 255.255.255.0.
If a PC subnet mask is 255.255.255.128 or higher, then the domain can't cover
192.168.0.200, so the setting won't take effective.
For speedily installing and easily setting the IP Address, there are provides an IP
Installer Wizard for you. Please install the application and see the user's manual for
detailed description and usage.
Do not use
Step 1
In Windows, open DOS window.
Enter DOS by <Start
Program
MS-DOS Prompt>
Step 2
Ensure the IP address assigned to IP Fast Dome doesn't occupy by other Host.
In DOS window, entering <ping 192.168.0.200> shall get time out message.
