5
w w w . l i k o . com
FreeSpan UltraTwin • 7EN130104 Rev. 2
Assembly
Before assembly, ensure that the uprights are locked in the lowest position (1700 mm / 67 inch.) and that the
upper locking handles have been removed from each upright. Lock the castor wheels on the uprights.
• Uprights (2 pcs.) with castor wheels, handles, locking
handles, parking position and charger mounts
• 4 screws (K6S M4x10)
1. Place both rails in one pair of uprights. Secure the rails
in place in the uprights with the locking handles. Ensure
that the handles are pointing downward, parallel to the
upright.
2. Repeat the procedure on the other side. Both rails
must be lifted into place simultaneously.
3. Install the desired lift units on the rail system, see below. When purchasing rails, select the rail with carriage
that is intended for use with Likorall lift units.
Before use, study the instruction guide for the respective lift unit!
Loosen and remove the nuts and bolts from the car-
riages. Insert the lift unit into the longer carriage, with
the end plate with the Emergency Stop button facing
away from the carriage.
Use the nut and bolt provided to secure the carriage
to the lift unit via the outermost hole in the mounting
rail on the top of the lift unit.
Guide the shorter carriage onto the lift unit’s mount-
ing rail from the other direction. Use the nut and bolt
provided to secure the carriage to the lift unit via the
outermost hole in the mounting rail on the top of the
lift unit.
Repeat the procedure with the other lift unit.
Before assembly, make sure you have the following components:
• Rails with corners (2 pcs.), end stops, carriages
and locking handles.
Adjustable
(friction) brake
