9
www.hillrom.com
7EN120114 Rev. 10 • 2020
Assembly
• the SSP Limit Switch functions properly
• the battery charger functions properly and the
indicator lamps are illuminated
during charging
• the batteries are charged for at least 8 hours before the
lift is used for the first time.
After assembly, ensure that:
• the lift’s functions correspond to the markings of the
hand control
• the electrical emergency lowering device
functions properly
Lifting accessory with quick-release hook,
Push down the red catch and connect the quick-release hook to the Q-Link II or Q-Link. Release
and check that the catch locks in order to prevent involuntary unhooking from the Q-Link II
or Q-Link. Read more about the Liko
TM
Quick-release Hook system on page 15.
Before lifting check that the
Quick-release Hook is correctly
attached to the Q-Link II or
Q-Link, see illustration above.
Quick
Release Hook
Q-Link II
or Q-Link
Manoeuvring
The lifting motion in Likorall
TM
200
overhead lift is controlled
using an attached hand control.
Likorall
TM
200
overhead lift
is manoeuvered by pressing lightly on the hand control
buttons. The arrows indicate direction. Motion ceases when
the button is released.
Operation
Up
Down
Hand control with spring clamp
When the lift is not in use, the hand control can be attached
to the lift strap using the spring clamp on the back side of
the hand control.