SMAX MODBUS®
Write Holding
button you send a command to write all
Holding Registers at the same time. It is also possible to press the
ENTER
key in
the keyboard of your personal computer: it sends a command to write the only
register where the cursor is placed. After having set a new value next to any
Holding Register, press the
button to transmit to the encoder all
Holding Registers data; or just press the
ENTER
key to send only the datum of
the Holding Register where the cursor is placed.
Inside the
FUNCTIONS
group box two further buttons are available:
UPDATE
FW
and
MANUAL FRAME
. The first button allows the operator to enter the
page for the firmware upgrade; the second button allows to enter the page
where PDUs can be transmitted manually. For complete information on the
firmware upgrade procedure please refer to the “5.4 Update FW page - Firmware
upgrade” section on page 39; for complete information on the manual
transmission of the PDUs please refer to the “5.5 Manual frame page –
Transmitting PDUs manually” section on page 42. By pressing the
NORMAL
button you move back to the main page.
5.3.2 Reading the Input Registers
In the largest group box on the left of the programming interface the Input
Registers are available, they provide result values and status / alarm information
MAN SMAX MB E 1.2
Quick reference
31 of 84
