SMAX MODBUS®
firmware upgrade operation is in progress.
For any information please refer to the “5.4
Update FW page - Firmware upgrade”
section on page 39.
Blinking at 10 Hz with duty cycle
= 50%
An error occurred while performing the
firmware upgrade operation. You must turn
the power off and on again to reset the
device and restart the operation. For any
information please refer to the “5.4 Update
FW page - Firmware upgrade” section on
page 39.
ON (Solid
GREEN
)
The firmware upgrade operation has been
carried out successfully, the encoder is
operating properly and no error is active. For
any information please refer to the “5.4
Update FW page - Firmware upgrade”
section on page 39.
MAN SMAX MB E 1.2
Electrical connections
24 of 84
