SMAX MODBUS®
occurs because the Server is not able to handle the request from the
Client are shown. For more information on the exception responses and
the MODBUS exception codes please refer to the “7.2 Exception response
and exception codes“ section on page 74.
7. In the
HOLDING REGISTERS
group box on the bottom right of the page
the Holding Registers are available; the items in this area allow to read
in or write into the working parameters of the connected device.
The main page allows the operator to choose the language used to display texts
and items in the user interface. Click the
Italian flag
icon at the top
right of the page to choose the Italian language; click the
UK flag
icon
to choose the English language.
On the top right of the page over the
FUNCTIONS
group box the
MESSAGES >
button is available. By pressing the button the main page widens and an
additional section appears on the right. The communication frames transmitted
from the software tool to the device and vice versa are shown. To close the
message window and go back to the standard visualization of the main page
press the
< CLOSE
button.
5.3.1 Configuring the serial port – Connection to the encoder
The four group boxes at the top of the main page group the items that are
necessary to configure the serial port and connect to the device. In particular
they allow (in order):
•
to select the serial port of the pc the encoder is connected to (in the
SERIAL LINE
group box);
•
to set the node address of the connected device and start the scanning
operation for finding the connected device (in the
DEVICE
group box);
•
to show some information about the device, once the connection is
established;
•
choose the page to display.
MAN SMAX MB E 1.2
Quick reference
28 of 84
