AMM8A SSI & BiSS C-mode
Step 3
Slide the encoder unit
5
over the code disk
3
until the screw holes
6
match up;
make sure that the metal enclosure of the encoder unit
5
does not hit or touch
the code disk
3
; always handle the encoder unit
5
by holding the metal
enclosure on the sides.
Step 4
Insert the three M3 x 6 cylinder-head bolts
7
in the holes
6
, do not tighten
them, just get a few turns to allow the position of the encoder unit
5
to be
slightly adjusted. Please ensure that the encoder unit
5
does not move up and
down.
MAN AMM8A SSI_BiSS E 1.10.odt
4 - Mounting instructions
27 of 80
