AMM8A SSI & BiSS C-mode
Step 3
Slide the encoder unit
5
over the code disk
3
and move it forward until it is
against the shaft
2
thoroughly; then move it back slightly; make sure that the
metal enclosure of the encoder unit
5
does not hit or touch the code disk
3
;
always handle the encoder unit
5
by holding the metal enclosure on the sides.
Step 4
Insert the three M3 x 6 cylinder-head bolts
7
in the holes
6
.
MAN AMM8A SSI_BiSS E 1.10.odt
4 - Mounting instructions
20 of 80
