LightWise ISG Allegro, Technical Manual

Page: 49 / 52

ISG Allegro LightWise USB 3.0 Technical Manual Version 1.3.1
49
Digital IO Control
Name Display Name Description Value
LineSelector Strobe Selector Selects the physical line (or pin) of the
external device connector to configure
Strobe 1 = 0
Strobe 2 - 1
LineMode Line Mode Controls if the physical Line is used to Input
or Output a signal
Output = 1
LineInverter Invert Strobe Output Controls the inversion of the signal of the
selected input or output Line
Invert StrobeInput Invert Strobe Input Custom feature: On this device, this controls
the inversion of the signal entering the strobe
control block. This should be adjusted such
that an active-high signal enters the strobe
controller
LineSource Strobe Source Selects which internal acquisition or I/O
source signal to output on the selected Line.
LineMode must be Output
LineFormat Line Format Controls the current electrical format of the
selected physical input or output Line
Opto Coupled = 5
StrobeDelay Strobe Delay (µs) Controls the delay (in microseconds) of the
signal of the selected output Line
Min = 0
Max = 1000
StrobeDuration Strobe Duration (µs) Controls the delay (in microseconds) of the
signal of the selected output Line
Min = 0
Max = 1000