6. Software Control - Lightware Device Controller
UCX series – User's Manual
58
Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1
6.7.
USB Crosspoint
In USB crosspoint tab, the connection between the of the upstream ports (USB-C and USB-B ports) and the
USB hub (USB-A ports) can be set.
#usb #usbc
6.7.1.
USB-C Port Properties
Available settings and tools
General
Port name
The name of a port can be changed by typing the new name and clicking on the
Set
button. The following
characters are allowed when naming: Letters (A-Z) and (a-z), hyphen (-), underscore (_), numbers (0-9), and
dot (.). Max length: 63 characters.
Lock
#lock #unlock
The port can be locked to the currently connected output ports by putting the tick. If the port is locked, and
the crosspoint state of this port cannot be changed.
