5. Device Concept
UCX series – User's Manual
31
Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1
Sending 5V Power to the Device
This function allows sending 5V power to the device (USB peripherial). Most USB devices powered by this
5V, so disable and enable this property is equal with unplug and plug the USB connector.
USB features in Taurus UCX series
Application of USB - Example
The Concept
The Webcam and USB microphone (D2) are connected to the Mac Mini computer(U3) through a USB HUB
(Taurus UCX). Zoom running on the computer sends video and embedded audio signal to the Taurus HDMI
input (I3).
The switcher forwards analog audio to the active speakers and digital video to the HDMI display.
Settings
Step 1.
In the Crosspoint menu, USB tab, switch the Mac Mini (U3) to the USB hub(H1).
Step 2.
Pay attention to the connected USB devices (D1 and D2) and turn on the
Power 5V Mode
.
Step 3.
The video crosspoint is switched to I3-O1.
5.2.3.
USB Service Ports - USB 2.0 Interface
Summary of USB 2.0 ports
Service ports
USB-A
USB 2.0
(480 Mbps)
mini USB- B
USB 2.0
(480 Mbps)
UCX-2x1-HC30
UCX-2x2-H30
UCX-4x2-HC30
UCX-4x2-HC30D
The
SERVICE
-labelled USB-A connector is designed for service function. The Mini B-type connector is reserved
for future LW3 control. Both features will be added by the future firmware update.
