Lightware UCX-2x1-HC30 Page 19 User Manual Download

Page: 19 / 167

3. Front Panel Control

UCX series – User's Manual

Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1

3.2.3.

Ethernet Status LEDs

DIFFERENCE:

The color of the left Ethernet LED is red

up to v2.0 hardware version. It does not refer to any

error, On/Off/Blinking state indicates the same function

as the left green one (above v.2.1) The hardware version

can be found in the

Status

in the LDC.

Left LED

color

HW version

Up to v2.0

v2.1 and above

LED state

Left LED

Function

Off

Not linked

On (Solid)

No activity

Blinking

Activity

LED state

Right LED

Function

Off

0 Mbit/s

On (Solid)

100 Mbit/s

3.2.4.

Dante

Audio Out (in UCX-4x2-HC30D model)

DIFFERENCE:

UCX-4x2-HC30D model has Dante

Audio Output.

LED state

Left LED

Right LED

Function

Off

No power

Solid green

Solid red

Dante is booting

Blinking

green

Solid green

Slave with sync (normal operation)

Blinking

green

Blinking green Clock master (normal operation)

Blinking

green

Blinking red

Acquiring clock sync (normal operation)

Alternating

red/green

Alternating

red/green

Identify (blinking for 6 seconds)

Blinking red

Dante fail safe

Blinking

orange

Blinking

orange

Dante is upgrading



 



Summary of Contents for UCX-2x1-HC30







































































































































































Search results

Summary of Contents for UCX-2x1-HC30

Reviews:

Related manuals for UCX-2x1-HC30

Brands by name

Popular brands

Lightware UCX-2x1-HC30, User Manual

Search results

Summary of Contents for UCX-2x1-HC30

Reviews:

Related manuals for UCX-2x1-HC30

Brands by name

Popular brands