3. Installation
MMX4x2 series – User's Manual
22
Applied firmware package: v1.6.0b19 | LDC software: v2.5.13b5
3.1.
Mounting Options
To mount the matrix, Lightware supplies optional accessories for different usage. There are two kinds of
mounting kits with a similar fixing method. The receiver has two mounting holes with inner thread on the
bottom side; see the bottom view in the
section. To order mounting accessories,
. Fasten the device with the screws enclosed to the accessory.
More details about the accessories and the mounting can be found in the
.
WARNING!
Always use the supplied screws. Using different (e.g. longer) screws may damage the device.
INFO:
The matrix is half-rack sized.
3.1.1.
1U High Rack Shelf
This accessory allows rack mounting for half-rack, quarter-rack and pocket sized units.
1U high rack shelf
1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.
Pocket sized devices can also be fastened to the self.
3.1.2.
Under-desk Double Mounting Kit
DIFFERENCE:
This kind of mounting is recommended for MMX4x2-HDMI and MMX4x2-HT200 models
only.
Under-desk double mounting kit
The UD-kit double makes it easy to mount a single matrix on any flat surface (e.g. furniture).
INFO:
The chipboard screws are not supplied with the mounting kit.
3.1.3.
Rack Ear-mounting
DIFFERENCE:
This kind of mounting is available for MMX4x2-HDMI-USB20-L model only.
The device can be mounted by the supplied rack ears.
Rack ears
Use the M4 Allen-head screws supplied with the matrix to fix the ear to the housing. The design allows
rotating the ears by 90°; choose the layout that fits the installation the best.
