Using the FT remote controller
Visual Poi V4 is supplied with a powerful FT remote controller, which allows you to control and
precisely start many Visual Pois from distances up to 200 meters away.
The remote can be used in two ways:
•
simple (manual) operation
– you can play with the color and dynamic modes available on
the remote, simply by pressing the corresponding buttons. This is similar to our other FT
products.
•
image sequence start / stop
– by pressing the buttons labeled 1 - 4 you can start your
uploaded image sequences instantly and perfectly synchronized thanks to the
Perfect Sync
feature.
FT remote controller layout
Powering on / off
To turn on the FT remote, press and hold the red
button for 1 second, until the blue indicator LED
on the remote starts shining.
To turn off, press and hold the red button again
until the blue LED stops shining.
The FT remote will turn off after 30 minutes of inactivity to save battery power. This feature is disabled, when any image sequence
(show) is running or the FT remote is plugged to the computer. Pressing any button on the remote will reset the timer.
Brightness or Speed
UP / DOWN
10 static colors
brightness can be
changed
5 dynamic modes
adjustable speed, brightness
and hue set from the most
recent static color
Show start buttons 1 - 4
press to start your
uploaded image
sequence
A/B button
selects the light
segment to be
controlled
ON/OFF button
also used to stop the
running image
sequence
Hold for
1 second