6
Wireless DMX Control
Click the push button to show current ID settings. Click the push button to
increase number.
1 - Red
2 - Green
3 - Yellow
4 - Blue
5 - Purple
6 - Bluish Green
7 - White
Working Status:
LED is always on
no DMX or no signal
Red LED flashing
sending
Green LED flashing
receiving
RF freqency features 126 bands, which are selected automatically to avoid
interference.
Communication
1. Power on the transmitter and receiver
2. Press key, set same ID for transmitter and receiver. If there is more than
one group of wireless LAN, make sure the ID of each network is different.
3. After sender receives DMX data, the sender will select a non-interfering
frequency band. The receiver will change communication bands until the
same ID data is found (green LED flashes). If DMX data communication
has been established, LED will blink faster.
