3
Operational Instructions
Connect the power supply to the input socket of the lamp head. The
fan will inflate at 100% speed automatically. After 10 seconds, the light
brightness will turn on 10%. 1 minute later, the light brightness becomes
100%. 2 minutes later, the light is fully infated and it enters the fan mode
to sustain the air level. The fan turns to 20% speed to sustain air level and
reduce operation noise.
Enter fan mode from menu, or click button E to enter the silent fan mode.
This will reduce noise a lot - due to the reduced fan speed of 15%. The fan
control function is not available under fan mode. If you need more infla-
tion, turn off the silence mode.
Once the lamp is restarted, it will power on. According to above mentioned
procedure it will inflate at full speed for 2 minutes. To prevent overload of
air, you can click button E to stop the inflation.
The home screen shows the brightness value which can be adjusted by
turning the adjustment knob on the right side of the display. Select button
A to adjust color temperature. Select button A or M to switch back to the
home screen.
100%
3200K
Figure 1 - Brightness Adjustment
- > > - - - - - - - - - - - - - -
3200
CCT
K
Figure 2 - Temperature Adjustment
100%
