STANDARD REGISTRATION
MEDIA CONNECTOR REGISTRATION (OTHER REGISTERED COMPONENTS IN PLACE)
(particularly valuable when Topcat is mounted in the ceiling or on the wall)
1. Start with the Topcat plugged in and powered on. To verify it is powered on,
there will be a blue power light on the front of the Topcat.
2. If replacing a Media Connector, make sure the malfunctioning unit is unplugged.
3. Plug in the new Media Connector. The blue power light will
turn on.
4. Locate the registration button on the back panel marked
“REGISTER”
5. Power on the existing Flexmike and wait until it has a solid
blue or red light (“Ready”).
8. After several seconds, the #1 light on the Topcat will turn solid. The
LINK light on front of the Media Connector will begin blinking, then
turn solid.
9. The registration is complete. You can now plug any audio source into
the Media Connector to verify there is audio.
10. Place system ID number (attached to the Topcat Daily Use Guide) on
the new Media Connector.
NOTE:
if at any point, the Topcat or Media Connector lights begin
blinking rapidly, that indicates a registration error. Unplug the new
Media Connector, then repeat steps 3 -8.
6. Use another registered functional component (existing Flexmike or
Sharemike) to trigger the registration function in Topcat.
(For the purpose of
these instructions, it is assumed that a Flexmike is the the existing registered
component.)
• Using a paperclip with the end straightened out
, press and hold the
registration button inside the registered Flexmike for 3 seconds.
• The 1 and 2 amber lights will begin blinking on the Topcat.
7. Briefly press the registration button on the Media Connector. The
REGISTER light and the #1 light on the Topcat will begin blinking.
Topcat
Access
Blinking lights
Registration
Button
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
16V/2.0A
1
4
3
2
2
1
AUDIO IN
AUDIO OUT
REGISTER
USB POWER
5V/1.5A
TONE
TREBLE
BASS
1
4
3
2
2
1
AUDIO IN
AUDIO OUT
REGISTER
USB POWER
5V/1.5A
TONE
TREBLE
BASS
1
4
3
2
2
1
AUDIO IN
AUDIO OUT
REGISTER
USB POWER
5V/1.5A
TONE
TREBLE
BASS
Registration
Button
AUDIO IN
MICROPHONE
AUDIO OUT
POWER
MIN
LINK
MAX
MIN
MAX
MIN
MAX
For users adding a Media Connector or replacing a lost or malfunctioning Media Connector.
Topcat
Access
Solid lights
AUDIO IN
MICROPHONE
AUDIO OUT
POWER
MIN
LINK
MAX
MIN
MAX
MIN
MAX
SYS
TEM ID#
SYS
TEM ID#
SYS
TEM ID#
SYS
TEM ID#
SYS
TEM ID#
RETAIN EXTRA LABELS IN THE EVENT A COMPONENT IS REPLACED OR ADDED.
Ma
tch components
to this system ID#
Apply to system components to indicate which parts are registered
as a system. Keep registered items together when storing away.
Registration ID Labels
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
334-0162-02-00-01
10101
Topcat
Access
Solid light
Power On
Solid light
(Existing Flexmike)
Blinking light
TOPCAT ACCESS REGISTRATION GUIDE
