Lightspeed 800IX, User Manual

Page: 33 / 48

8 0 0 i X U s e r M a n u a l
28 | 800iX User Manual
Do not attempt to charge alkaline batteries. They can overheat and expand,
creating a significant hazard and damaging the
LT-71 and HM-70. (This is not covered by the warranty.)
1. Ensure that the HM-70 is turned OFF .
2. Make sure the cradle charger
is plugged into a wall outlet.
Connect one end of the
charging cable into the
jack labeled CHARGER on
the side of the HM-70 and
plug the other end into the
charging jack on the rear of
the cradle charger. The HM-
70’s rechargeable batteries
are factory installed. The LED
on the front of the Handheld
Mic will glow GREEN when
charging.
3. Leave
the HM-70 plugged in
overnight (8–10 hrs.) to obtain a full charge. The GREEN light will turn off when
fully charged.
CHARGING THE OPTIONAL HM-70
Helpful Hint
2.06/2.54
AUDIO OUTPUT
DC POWER
16V/1A
CHARGE
LEVEL
MIC LINE
CHANNEL A CHANNEL B SENSOR INPUTS
SHORT
BALANCED
AUDIO
OUTPUTS
+ —
NOTE:
If the system was purchased without a
REDMIKE or REDMIKE VC, the HM-70 will utilize the
charger jacks on the back of the 800iX.