Lightspeed 800IX, User Manual

Page: 27 / 48

8 0 0 i X U s e r M a n u a l
22 | 800iX User Manual
CHARGING THE OPTIONAL REDMIKE VC
1. Plug power cord into the
cradle charger and then
plug the AC end into an
electrical outlet.
• REDMIKE VC incorporates alkaline protection into the microphone design.
Replacement AA NiMH batteries may only be purchased through Lightspeed
Technologies (part # BA-NH2A27).
• A blinking LED indicates a charging or sensing error (see page 7.)
Be sure to use a Lightspeed rechargeable sensing battery.
2. Ensure
that the REDMIKE VC
is turned OFF.
3. Place
the REDMIKE VC into the cradle. The LED on the cradle
will glow RED indicating charging has started. When the
REDMIKE VC is fully charged the LED on the cradle charger
will change to GREEN.
Helpful Hint