background image

 

 

 
 
 
 
 
 
 
 
 
 
 

All Lightronics products are warranted for a period of TWO/FIVE YEARS from the date of 
purchase against defects in materials and workmanship. 

 
 

This warranty is subject to the following restrictions and conditions: 

 
A)  If service is required, you may be asked to provide proof of purchase from an authorized 

Lightronics dealer. 

 
B)  The FIVE YEAR WARRANTY is only valid if the warranty card is returned to Lightronics 

accompanied with a copy of the original receipt of purchase within 30 DAYS of the 
purchase date, if not then the TWO YEAR WARRANTY applies.   Warranty is valid only for 
the original purchaser of the unit. 

 
C)  This warranty does not apply to damage resulting from abuse, misuse, accidents, shipping, 

and repairs or modifications by anyone other than an authorized Lightronics service 
representative. 

 
D)  This warranty is void if the serial number is removed, altered or defaced. 
 
E)  This warranty does not cover loss or damage, direct or indirect arising from the use or 

inability to use this product. 

 
F)  Lightronics reserves the right to make any changes, modifications, or updates as deemed 

appropriate by Lightronics to products returned for service.  Such changes may be made 
without prior notification to the user and without incurring any responsibility or liability for 
modifications or changes to equipment previously supplied.  Lightronics is not responsible 
for supplying new equipment in accordance with any earlier specifications. 

 
G)  This warranty is the only warranty either expressed, implied, or statutory, upon which the 

equipment is purchased.  No representatives, dealers or any of their agents are authorized 
to make any warranties, guarantees, or representations other than expressly stated herein. 

 
H)  This warranty does not cover the cost of shipping products to or from Lightronics for 
 service. 
 
I) 

Lightronics Inc. reserves the right to make changes as deemed necessary to this warranty 
without prior notification. 

 
 
 
 
 
 
 

 

Lightronics Inc. 

 

 

 

 

 

509 Central Drive  Virginia Beach,  VA 23454

 

 

20050125

WARRANTY

 

Summary of Contents for TL - 2448



















Reviews: