Lightning Audio S2.200, Manual

Page: 9 / 28

- 7 -
Mounting LocAtion
The mounting location and position of your amplifier will have a great effect on its ability to dissipate the heat generated
during normal operation To maximize the performance of your amplifier, care should be taken to ensure adequate venti-
lation.
Trunk Mounting
Mount the amplifier vertically this will provide the best cooling of the amplifier.
Mounting the amplifier on the floor of the trunk will work but provides less cooling capability than vertical mounting.
Mounting the amplifier upside down to the rear deck of the trunk will not provide proper cooling and will severely affect
the performance of the amplifier and is strongly
not recommended.
Passenger Compartment Mounting
Mounting the amplifier in the passenger compartment will work as long as you provide a sufficient amount of air for the
amplifier to cool itself. If you are going to mount the amplifier under the seat of the vehicle, you must have at least 1"
(2.54cm) of air gap around the amplifier's heatsink.
Mounting the amplifier with less than 1" (2.54cm) of air gap around the amplifier's heatsink in the passenger compart-
ment will not provide proper cooling and will severely affect the performance of the amplifier and is strongly
not recom-
mended.
Engine Compartment Mounting
Lightning Audio amplifiers should never be mounted in the engine compartment. Not only will this void your warranty but
could create an embarrassing situation caused by the ridicule from your friends.