LIGHTMED TruScan Pro
–
Operator’s Manual Rev. No. 01
Page
40
of
109
Activated
When this button is pressed, the total laser
shot counter is reset to zero.
4
Shot counter
Displays the total laser shots fired during the treatment session.
5
Total Energy (J)
To indicate the total delivered energy to the patient, in J.
6
SP-Mode
Inactive
The sub-threshold pulse (SP) mode is
OFF.
Activated
The sub-threshold pulse (SP) mode is ON. The SP-
mode duty cycle is selectable from 2.5% to 50%.
7
Aiming beam
intensity
The aiming beam intensity can be adjusted with the two up and
down arrows.
8
Aiming beam
intensity display
Displays the brightness of the aiming beam. At the maximum
brightness, the output power is around 1.0 mW or less to the
patient’s cornea.
9
Software version
Displays the current software version.
10
Spot size on retina
Displays the spot size on patient’s retina in µm.
11
Spot size display
Displays the spot size in µm. The spot size quick menu can be
accessed by clicking on the right arrow to expand the following spot
size options:
•
50 µm
•
100 µm
•
200 µm
•
300 µm
•
400 µm
•
500 µm
12
Duration controls
The duration of laser exposure to the patient each time the
footswitch is pressed in the “READY” mode can be adjusted by the
