LightmaXX
LED DROP System
Effect Backdrop Curtain
____________
6. Combine several pieces LED Vision Curtain to make a big curtain
There are male and female velcro at the left and right side of the curtain , the function of these velcro
is just to combine several pieces into one. But not to load too much.
Signal Cable Connection
There is Signal Cable with 4pin plug at the back of each curtain, Connecting this Signal Cable to the
controller, and then lock the nut on the plug. For several pieces curtains, just need to connect the
controllers with 3pin DMX Signal Cable.
Power Cable Connection
Get out the Power Cable from the carton, before connecting this cable between controller and power
supply, please make sure the voltage is AC90V-240V 50Hz-60Hz.
Disassembly
(1) Take off Power Cable
(2) Take off Signal Cable
(3) Unfasten the velcro between curtains
(4) Release all reusable zip ties
(5) Clean the curtain
(6) Fold the curtain and put it into the carton
18
