Lighthouse NanoCount 30+, Operating Manual

Page: 32 / 94

Lighthouse NanoCount 30+ Operating Manual
3-14 248083427-1 Rev 4
10. Adding devices or additional connections between the sample
source and the sensor will increase the chances for leaks and
bubbles - keep connections to a minimum.
Inlet Connection to Sample Source
Note:
The user is
responsible for
maintaining a nominal
flow rate of 80 ml/min. +
5% through the sensor.
The sample source is connected to the instrument using ¼" flare tubing
attached to the Inlet Nozzle. The user is responsible for maintaining a
nominal flow rate of 80 ml/min. + 5% through the sensor to ensure the
accuracy of the data. See Figure 3-17.
Figure 3-17 Example of an NC30+ Installation
If there are any questions or problems during system setup, please
contact Lighthouse Worldwide Solutions’ Technical Support at 800-
945-5905 (USA Toll Free), 541-770-5905 (Outside of USA) or
techsupport@golighthouse.com.
Sample Source
Sample Return
or to Drain
Inlet
Nozzle
Outlet
Nozzle
NC30+