LIGHT PROGRESS
FLOW-C-NX [Eng.]
Rev. 2 Oct -2020
Pag. 3/16
SECURITY WARNING
The Company has ensured that every care is taken in the design and production of its machinery. In order to guarantee,
as far as possible, that it is safe when used correctly. However, the laws on accident prevention require all users of the
machinery to ensure that whoever is responsible for installation, maintenance, use and sale of these products is shown
the instruction provided by our company and is made aware of the precautions to be taken.
According to the circumstances, the appropriate recommendations made in these instructions must be made available,
together with any other relative information, to any company or person involved in the installation of LIGHT PROGRESS
products.
Only use this appliance for its intended purpose as described in this booklet.
If the appliance is wrongly operated for a purpose other than that for which it is intended, no liability can be accepted for
any possible damage. The manufacturer cannot be responsible for any damage to people, animals and objects caused
by use or operation of the appliance contrary to these instructions.
As with all electrical appliances the safety information and precautions contained in this booklet must be carefully
observed, including following:
Before maintenance or cleaning ensure that the appliance is switched off and unplugged from the mains supply.
Should the appliance become faulty please contact our authorized Service Centre direct and in case of repairs ask for
genuine parts.
Improper repairs may damage the appliance and place the user at serious risk.
WARNING
Avoid exposure to UV-C rays emitted by germicidal lamps, even
for few seconds, as it may cause severe conjunctivitis and
erythema.
Plastic or painted surfaces exposed to direct UV-C rays may
progressively yellow, similar to a long exposure to sunlight.
The intended use is as a germicidal lamp for sterilization, any other
use is improper and dangerous.
The lamp, as supplied, cannot be modified or designed for use with
accessories or tools.
Disclaimer: All responsibilities and warranty will be void due to
tampering or lack of maintenance.
•
Carefully read the following instruction before use
•
Before opening of the UV section, ensure the UVC device is OFF and unplugged in order
to avoid exposure to UVC light emitted by the germicidal lamp; It may cause severe
conjunctivitis and erythema.
•
Remove the protection film from the device before turning on the UV-C lamp.
•
This device cannot be operated children and by persons with reduced physical, sensory or
mental capacities.
•
Ensure all users have the required knowledge and the related instructions about the safe use
of the device and the related risks.
Refer to ARPANSA Radiation Standard: Occupational Exposure to Ultraviolet Radiation for additional
https://www.arpansa.gov.au/sites/default/files/legacy/pubs/rps/rps12.pdf
