rev. 0
P. 5
Fire & Hazardous Materials
WARNING:
Leaving the machine unattended while in use can result in a fire and
substantial damage to the machine and the building it resides in. Any damage caused
by fire that is not due to defects in workmanship or the machine itself will NOT be
covered by the LightObject warranty.
Hazardous Materials:
Any materials considered hazardous are NOT recommended to
etch, cut or engrave. These materials can produce toxic fumes or cause the machine to
not function properly.
Materials that should
NOT
be used on the machine:
Polycarbonate
PVC Compounds
Vinyl
Fumes produced by above materials can cause irritation to eyes, skin and the
respiratory tract. This material should not be exposed to elevated temperatures.
Laser Safe Materials:
Acrylic, Wood, Leather, Plastics (ABS, POM, Polyimide, PP, Styrene), Fabric, MDF,
Cardboard, Paper, Foam, Fiberglass, rubber, Steel
