rev. 0
P. 24
Laser: Pulses the laser beam
Box: Frames the working area from the origin point of the current file.
Origin: Select the starting point of your file within the work table.
Stop: Once pressed, the machine will stop its current function and move back to its
origin.
Press
【
Stop
】
+ up / down arrow buttons next to the number buttons to
control Z-table movement (if applicable).
Start/Pause: Pause the machine and keep it stay at location. Press again to resume.
Enter: Validate the choice or change.
It can also be used to change the top menu
setting including (File, Speed, Power, Pressure, Track Height) by pressing it once.
Arrow keys: Move the laser head to X/Y axis
Hand: Change the speed switching (fast/slow) of moving axis manually.
Esc: Stop the current work that the machine is doing or to exit the current menu
Functions of typical keypad (e.g. RDC6332G):
Reset: Refresh the system and will stop all running applications and return to the main
interface.
Start/Pause: Start or Pause the current work on the laser
Stop: Stop all running applications
Origin: Select the starting point of your file within the work table.
Pulse: Pulses the laser beam
Frame: Show you the framed area of which your file will run in
File: Show the management of the memory Sending files to your Laser Machine
