rev. 0
P. 17
Cutting non-metal
a)
There is no need to enable “Cut In/Out".
b)
Go to “User” tab in the menu on the right hand side. Set “Mixcut
parameters” by setting “Enable pulse punch” to “No”.
Set up with RDworks
1)
Download and install the software RDWorks from
http://www.rd-acs.com/
2)
Connect the USB cable.
3)
Click on “Setting” in Device. It should show the device is connected.
Set up with LightBurn
1)
Download and install the software LightBurn from
https://lightburnsoftware.com/
2)
Connect the USB cable.
