Light Bright
Arond 200
11. Service and cleaning
ATTENTION: Always disconnect the device from the voltage source
before opening it!
You should check the function of the fans in the head and foot at regular intervals. Above all,
you should make sure that the air intakes as well as the inside of the spotlight are free of lint
and dust.
To do this, open the head cover and the base plate at the foot. You can clean the spotlight
with a brush/cleaning cloth and a vacuum cleaner or compressor (low speed only).
Take care not to bend or damage any parts during cleaning. After cleaning is complete, close
all covers again with the corresponding screws and carry out a function test.
Please use only clean cleaning cloths or brushes and cleaning agents without alcohol to
clean your device. We recommend regular cleaning at least every three months.
Pay attention to damage to the device, parts of the device and the connection cables. If you
notice any damage, DO NOT use the device and take it to an authorized dealer to exclude
dangers by using defective devices and to repair your device professionally.
15
